Top 10 Semiconductor Companies To Watch In Right Now

As of January 15, short interest in several semiconductor stocks increased as investors continued to bet against PC processors and memory chips in favor of mobile devices. With only a couple of exceptions, short interest in chip stocks is on the rise again.

For Intel Corp. (NASDAQ: INTC), short interest fell 0.7% to 213.43 million shares. About 4.3% of Intel’s float was short. Intel has already reported fourth-quarter results that missed EPS estimates, so the shorts are clearing out, waiting for the next round of buying to bolster the share price and give them more headroom for a profitable short sale.

Advanced Micro Devices Inc. (NYSE: AMD) saw short interest rise by 1.6% to 122.94 million shares, or 23% of the company�� total float. AMD, like Intel, has already reported fourth-quarter results and the share price has been sinking — not the direction short sellers like to see.

Qualcomm Inc. (NASDAQ: QCOM) short interest rose 6.7% to 21.21 million shares, which represents about 1.3% of the company’s float. Qualcomm reports quarterly results Wednesday and is expected to post EPS of $1.18 on revenues of $6.66 billion. Since January 15, shares are down more than $2.00.

Top 10 Forestry Companies To Own For 2015: NextStage Inc (NXT)

NextStage, Inc. is a holding company. The Company is engaged in the management of its investments in shares of stocks of its subsidiaries. The Company�� subsidiaries include Mondex Philippines Inc. (MXP), Infinit-e Asia Inc. (Infinit-e Asia) and Technology Support Services, Inc. (TSSI). MXP operates a multi-application smart card system in Philippines. Infinit-e Asia is a software development company specializing on smart card and e-commerce solutions tailored to enhance the business of its clients. Infinit-e Asia develops smart card solutions for both real and online applications and on both contact and contactless platform. Infinit-e Asia�� spectrum of products and applications are classified as payments, data capture and security. TSSI is engaged in the business of business process outsourcing (BPO), applications service providers (ASP) and managed service providers (MSP). Advisors' Opinion:

• [By Namitha Jagadeesh]

  HSBC Holdings Plc (HSBA), Europe�� largest bank, slid 2.1 percent. International Consolidated Airlines Group SA (IAG) declined 2 percent as it canceled some of its flights following a disruption caused by one of its planes at Heathrow airport. Next Plc (NXT) retreated 2.4 percent as Morgan Stanley cut its recommendation on the shares.

Top 10 Semiconductor Companies To Watch In Right Now: Intermolecular Inc (IMI)

Intermolecular, Inc. (Intermolecular), incorporated on June 16, 2004, is engaged in research and development and time-to-market for the semiconductor and clean-energy industries. The Company, through paid collaborative development programs (CDPs) with its customers, develops technology and intellectual property (IP) for its customers focused on advanced materials, processes, integration and device architectures. The Company provides its customers with technology through various fee arrangements and grants them rights to associated IP, primarily through royalty-bearing licenses. Through paid CDPs and its own development, the Company has established a portfolio of greater than 1,000 patents and patent applications. Its approach is broadly applicable to high-volume integrated device markets, which include the markets for semiconductors, flat glass coatings and glass-based devices, solar cells, light-emitting diodes (LEDs), flat-panel displays, advanced batteries and other energy efficiency applications.

As of December 31, 2012, the Company targets large, high-volume semiconductor and high-growth emerging clean energy markets, including DRAM, non-volatile memory (including flash memory and embedded memory), complex logic, flat glass coatings and glass-based devices, solar cells, LEDs and other energy efficiency applications. The Company�� customers include ATMI, Inc. (ATMI), Elpida Memory, Inc. (Elpida), First Solar. Inc. (First), GLOBALFOUNDRIES Singapore Pte. Ltd (GLOBALFOUNDRIES), Guardian Industries Corp. (Guardian), SanDisk Corporation (SanDisk), Taiwan Semiconductor Manufacturing Company (TSMC) and Toshiba Corporation (Toshiba). For the year ended December 31, 2012, the Company has received the majority of its revenue from customers in DRAM, flash memory, complex logic and energy-efficient applications in flat glass. The elements in HPC platform include Tempus HPC processing, automated characterization, and informatics and analysis software. Tempus HPC processing are used to process ! different experiments consisting of combinations of materials, processing parameters, sequencing and device structures. Automated characterization systems are used to characterize the substrates processed by its Tempus HPC processing tools. Informatics and analysis software are used to automate experiment generation, characterization, data analysis and reporting.

The Company�� HPC platform consists of its Tempus HPC processing tools, automated characterization and informatics and analysis software. The Company�� platform is purpose-built for Research and Development (R and D) using combinatorial process systems. Combinatorial processing is a methodology for discovery and development that employs parallel and other high-throughput experimentation, which allows R and D experimentation to be performed at speeds up to 100 times faster than traditional methods. The Company�� processing tools allows performing up to 192 experiments on a single substrate.

Advisors' Opinion:

• [By Lisa Levin]

  Intermolecular (NASDAQ: IMI) shares touched a new 52-week low of $4.84. Intermolecular shares have dropped 45.09% over the past 52 weeks, while the S&P 500 index has gained 26.39% in the same period.

• [By Sofia Horta e Costa]

  ARM Holdings Plc (ARM) lost 2.6 percent, leading European technology companies lower before it publishes half-year results next week. IMI Plc (IMI) gained 2 percent as Citigroup Inc. listed the engineering company among its most preferred stocks.

• [By Jake L'Ecuyer]

  Leading and Lagging Sectors
  Technology shares gained about 0.68 percent in today's trading. Meanwhile, top gainers in the sector included Intermolecular (NASDAQ: IMI), up 38.3 percent, and Infinera (NASDAQ: INFN), up 9.4 percent. In trading on Monday, utilities shares were relative laggards, down on the day by about 0.68 percent.

Top 10 Semiconductor Companies To Watch In Right Now: NeoPhotonics Corp (NPTN)

NeoPhotonics Corporation, incorporated on October 31, 1996, is a designer and manufacturer of photonic integrated circuit (PIC)-based modules and subsystems for bandwidth-intensive, high-speed communications networks. The Company has a portfolio of over 300 products, including products that enable data transmission at 10 gigabytes per second, 40 gigabytes per second and 100 gigabytes per second, agility products, such as reconfigurable optical add/drop multiplexers (ROADMs) that allocate bandwidth to adjust for volatile traffic patterns, and access products that provide high-bandwidth connections to more devices and people over fixed and wireless networks. In October 2011, the Company acquired Santur Corporation. In June 2013, it announced first shipments of optical transceiver modules out of its new, high capacity factory in Dongguan, Guangdong Province, China.

The Company�� products are categorized in 34 product families. The Company sells its products to the network equipment vendors globally, including ADVA AG Optical Networking Ltd., Alcatel-Lucent SA, Ciena Corporation (including its recent acquisition of Nortel�� Metro Ethernet Networks business), Cisco Systems, Inc., FiberHome Technologies Group, ECI Telecom Ltd., Telefonaktiebolaget LM Ericsson, Fujitsu Limited, Harmonic, Inc., Huawei Technologies Co., Ltd., Mitsubishi Electric Corporation, NEC Corporation, Nokia Siemens Networks B.V. and ZTE Corporation.

The Company competes with Finisar Corporation, JDS Uniphase Corporation, MRV Communications, Inc., NTT Electronics Corporation and Sumitomo Electric Device Innovations, Inc.

Advisors' Opinion:

• [By Anders Bylund]

  Close competitor NeoPhotonics (NYSE: NPTN  ) soared 15% higher. Larger rival JDS Uniphase (NASDAQ: JDSU  ) jumped 7.9% to become the fastest gainer on the S&P 500. If Ciena can beat its own expectations in selling Internet backbone equipment to a bevy of major telecoms, its chief rivals must eventually follow suit. JDS is only one month removed from its latest quarterly report, which sent shares diving 7% overnight (but all was forgiven a week later). NeoPhotonics also reported in early May, but didn't make any waves then.

Top 10 Semiconductor Companies To Watch In Right Now: Aeroflex Holding Corp (ARX)

Aeroflex Holding Corp. (Aeroflex Holding) is a provider of radio frequency (RF) and microwave integrated circuits, components and systems used in the design, development and maintenance of wireless communication systems. The Company�� solutions include microelectronic components and test and measurement equipment used by companies in the space, avionics and defense; commercial wireless communications, and medical and other markets. Its products include a range of RF, microwave and millimeter wave microelectronic components, integrated circuits (ICs), and analog and mixed-signal devices. It also manufactures a range of RF and microwave wireless radio and avionics test equipment and solutions particularly for the wireless, avionics and radio test markets. The Company operates in two segments: Aeroflex Microelectronics Solutions (AMS) and Aeroflex Test Solutions (ATS). In August 2010, it acquired Advanced Control Components. In September 2013, the Company announced the sale of its Aeroflex Test Equipment Services (ATES) business to Trescal Limited. In February 2014, Aeroflex Holding Corp announced the acquisition of Shenick Network Systems.

Aeroflex Microelectronic Solutions

AMS offers a range of microelectronics products and is a provider of specialty products for the space, avionics, defense, commercial wireless communications, medical and other markets. RadHard products are specifically designed to tolerate high radiation level environments, which otherwise can degrade electronic components. The Company principally operates on a fabless semiconductor manufacturing model, outsourcing virtually all front-end semiconductor fabrication activities to commercial foundries. AMS offers a range of complementary products that provide connectivity and computing functionality for applications. Its product portfolio includes RF, microwave and millimeter wave products, including discrete components, ICs, monolithic microwave ICs and multi-chip modules.

AMS designs and manu! factures application specific, analog and mixed-signal devices for use in medical, industrial and intelligent sensors. The Company�� AMS products are used in over 100 space, avionics and defense platforms, including the Wideband Global Satellite Communications satellites, the Geostationary Operational Environmental satellites, the Advanced Extremely High Frequency satellites, the Boeing 777 airliner's databus, the F-16's modular mission computer, the B-1 flight controls upgrade and the Terminal High Altitude Area Defense program. Its AMS products are also used in wireless communications platforms, including WCDMA and LTE cellular base station systems, as well as point-to-point broadband radio applications. In the medical area, our products are used by two of the top four manufacturers of CT scan equipment.

AMS provides HiRel standard and custom integrated circuits and circuit card assembly for the aerospace, altitude avionics, medical, x-ray cargo scanners, critical transportation systems, nuclear power controls, global positioning systems (GPS) receivers, networking and telecommunication markets. AMS' HiRel products include transceivers, analog multiplexers, clock management generators, MSI logic products, battery electronics units, voltage regulators, high-speed power controllers, MIL-STD 1553 bus controllers, remote terminals, bus monitors, microcontrollers and microprocessors, RadHard Pulse Width Modulation Controllers, RadHard Resolver-to-Digital and memory modules. HiRel Microelectronics/ Semiconductors have a typical life cycle of 10-20 years.

AMS provides a set of standard and application specific RF/microwave diodes and semiconductor devices. Microwave semiconductor products offered include diodes, amplifiers, resistors, inductors, capacitors, switches, and integrated devices. RF and Microwave active components and subsystems offered include PIN diode-based microwave control components, variable attenuators, phase shifters, limiters, time delay units and Multi-Funct! ion Micro! wave assemblies. AMS offers resistor products, which include a variety of low and high reliability power surface mounted passive devices for the wireless infrastructure and defense markets with applications in isolators, circulators, single and multi-carrier power amplifiers and circuits. Passive components offered include attenuators, terminations, adapters, DC blocks, and other components for commercial, military and laboratory applications. Other products include power amplifiers, up and down converters, mixers, filters and micro-receivers operating to over 40 giga hertz (GHz). RF and Microwave components have a typical life cycle of 5-15 years. The Company�� motion control products provide complete and integrated motion control solutions for space (both military and commercial), military, avionics, and industrial customers. Its product line offerings include actuators and mechanisms, electronic controllers, slip rings and twist capsules, DC motors and Gimbal Systems. Motion control products have a typical life cycle of 10-20 years.

Aeroflex Test Solutions

ATS is a provider of a line of specialized test and measurement hardware and software products, primarily for the space, avionics, defense, commercial wireless communications and other markets. ATS products and their applications include wireless test equipment, which is used to develop and test handsets and base stations; military radio and PMR test equipment, which is used by radio manufacturers and military, police, fire, and emergency response units to test handheld radios; avionics test equipment, which is used in the design, manufacture and maintenance of electronics systems for aircraft; synthetic test equipment, which is used to test satellites and transmit / receive modules prior to launch and deployment, and general purpose test equipment, including spectrum analyzers and signal generators.

Wireless Test Equipment is used by wireless service providers and equipment manufacturers to test wireless ! handsets ! and base stations. The Company offers a range of cellular tests across a range of wireless standards and communication frequencies, including 2G and 3G, with particular capability in EDGE protocols, and the new 4G LTE/LTE(A) protocols. Products include a range of system, protocol, physical layer and parametric test solutions, such as the TM500 test mobile, RF synthesizers, digitizers and combiners, and application software. In addition, ATS provides PXI-based products which are modular scalable solutions for the handset manufacturing environment. Product applications include research and development, conformance, manufacturing/production, installation and commissioning, field service, and network optimization.

ATS Radio Test Equipment is used by radio manufacturers and military, police, fire and emergency response units to test handheld radio units. ATS provides TErrestrial Trunked Radio (TETRA), and Project 25 (P25), radio test equipment, addressing both mobile and repeater test applications. TETRA is a global standard for private mobile radio (PMR), systems used by emergency services, public transport and utilities. P25 is a standard for digital radio communications for use by federal, state, private, and local public safety agencies in North America. Its military communications testing systems are primarily used by the United States military to test complex voice and data frequency hopping radios and accessories. Military radio and PMR test equipment has a typical life cycle of 5-20 years.

Avionics test equipment is used in the design, manufacture, test and maintenance of commercial, civil and military airborne electronic systems, or avionics. ATS equipment provides the stimulus and signals necessary for certification, verification, fault finding and diagnosis of airborne systems on the ground. For civil and commercial aviation, it has test solutions for various transponder modes, communications frequencies, emergency locator transmitters, weather radars and GPS systems. F! or milita! ry aviation, it has test solutions for microwave landing systems, tactical air navigation, enhanced traffic alert and collision avoidance systems, various identification friend or foe, or IFF, transponder/interrogator modes and IFF monopulse antenna simulation. ATS also provides customized avionics test solutions to support manual and automatic test equipment for manufacturing, repair and ground support operations. Avionics test equipment has a typical life cycle of 8-15 years.

Synthetic test systems test several attributes through one box and can take multiple complex measurements simultaneously. ATS provides synthetic test environment that allows digital, analog, RF/microwave and power test of circuits, modules, subsystems and complete systems for commercial, military, and aerospace customers. ATS' STI 1000C+ and TRM 1000C products offer synthetic microwave test systems optimized for testing Transmit/Receive modules and satellite payloads in a factory setting. Its SMART^E and SMART^E 5300 products offer a modular approach for implementing multi-function configurable and reconfigurable test systems. Synthetic test solutions products have a typical life cycle of 10-15 years.

ATS offers a variety of general purpose test solutions including microwave test solutions, counters and power meters. ATS microwave test solutions cover frequency ranges from 1 megahertz (MHz) to 46 gigahertz (GHz), with various tracking, offset, continuous wave, modulated source, fault location, and group delay configuration options provided. ATS power meters are designed for field use, automated test equipment requirements and standard bench applications. General purpose test solutions have a typical life cycle of 4-7 years.

The Company Competes with Agilent Technologies, Honeywell, BAE Systems, Hittite Microwave Corporation, ILC / Data Devices Corporation, Microsemi, Anaren, Anite, Anritsu, Rohde & Schwarz, Spirent and National Instruments.

Advisors' Opinion:

• [By Rich Smith]

  The Department of Defense issued some 22 separate contract awards Thursday, totaling just under $1 billion in combined value. Not all of them went to publicly traded defense contractors, of course, but enough of them did to be worth mentioning. Here are a few of the lucky winners:

Top 10 Semiconductor Companies To Watch In Right Now: Camtek Ltd (CAMT)

Camtek Ltd. (Camtek), incorporated in 1987, designs, develops, manufactures and markets automated solutions dedicated for enhancing production processes and yield for the semiconductor manufacturing and packaging and the printed circuit board (PCB) and integrated circuit (IC) substrate industries. Camtek also designs, develops, manufactures and markets automated optical inspection (AOI), systems and related products. The Company�� AOI systems are used to enhance both production processes and yields for manufacturers in the semiconductor manufacturing and packaging industry and PCB and IC Substrate industry. Through the acquisition of Printar's assets, it also engaged in developing, manufacturing, sale and marketing of direct digital material deposition systems and inks for the PCB industry, with two major fields of activity: Solder Mask and Legend. In addition, through the acquisition of Sela, it is also engaged in the development, manufacturing and marketing of automated scanning electron microscope (SEM) and transmission electron microscope (TEM) sample preparation equipment, primarily for the semiconductor industry.

As of December 31, 2011, the Company had sold more than 2,500 AOI systems in 34 countries worldwide. The Company's PCB customer base includes the majority of the 100 PCB manufacturers worldwide. As of December 31, 2011, it had sold over 300 Falcon systems to more than 25 semiconductor manufacturers, among them outsourced semiconductor assembly and test (OSAT), integrated device manufacturers (IDM) and wafer level packaging subcontractors, including eight out of the top 10 semiconductors companies.

Camtek�� AOI systems consist of an electro-optical assembly unit, either movable or fixed, which consists of a video camera, precision optics and illumination sources. The electro-optical unit captures the image of the inspected product; a precise, either movable or fixed table, that holds the inspected product, and an electronic hardware unit, which operates the! entire system and includes embedded components that process and analyze the captured image by using its algorithms. Its systems can also compile and communicate statistical reports of inspection findings through the customer�� factory information system. The Company offers a range of systems for automated optical inspection of semiconductor wafers, IC substrates and PCBs. These systems are used to enhance production yields and assist in controlling manufacturing processes at wafer fabrication, test and assembly houses, and PCB plants worldwide.

The Company�� Falcon systems are designed for the back end market of the semiconductor industry. The Falcon�� advanced algorithms and inspection capabilities enable its dedicated models to detect defects in the die, which, if left undetected, may cause failure. The Condor is designed to meet the current and future inspection needs of the semiconductor industry. The Condor, through algorithms and advanced hardware configuration, is designed to enhance two dimensional (2D) and three dimensional (3D) detection abilities and increased throughput. The Condor family includes models for: 3D and 2D metrology and inspection of bumped-wafer prepared for packaging in the flip-chip technology; 2D metrology and inspection of finished wafers at the end of their manufacturing process and in test houses; Post-dicing inspection of frame-mounted wafers at assembly and packaging facilities, where it adds the value of detecting dicing-related damage, and inspection and metrology of micro-electro mechanical systems (MEMS) and other special applications.

Condor 5LED is an AOI system designed to provide solutions to a range of requirements that are to light emitting diode (LED) semiconductor manufacturers. The LED market�� special inspection requirements are characterized by 3-6 inch wafers, each of which may contain between 100 to over 200 thousand LED devices per wafer. Typically, the wafer is made of a translucent compound semiconductor, such as g! allium ar! senide, gallium phosphide and/or indium phosphide. The Gannet system is designed for the front end market of the semiconductor industry.

The Company�� AOI products for this industry consist of five product lines: the Phoenix, Dragon and Orion for the inspection of inner and outer layers of PCB panels and ultra-fine-line IC substrate; large area masks (LAM) dedicated for inspection of artwork; and the Pegasus for final inspection (AFI) of IC substrates and high density interconnect (HDI) panels. The Phoenix product family, introduced in November 2011, is designed to support a range of the demanding PCB and IC substrate applications, while keeping in pace with the dynamic technology changes in the industry. The Phoenix product family is enhanced with Spark - Camtek's and detection engine providing high detection capabilities, while minimizing false calls.

Dragon systems are high-throughput, automation-ready systems for inspection of all PCB types in a mass production environment. Dragon models are optimized for specific PCB technology ranges - from mainstream circuits of typically 100 (microns) conductor line width, up to high density substrates having 12 (microns) wide conductive lines. All Dragon models are designed to interface with automated material handling mechanisms provided by the Company or other automation suppliers. Orion systems are stand-alone AOI systems for high volume inspection of all PCB types designed to operate in inspectify mode of operation. Inspectify is a mode of operation enabling the operator to perform verification immediately after inspection on the same system, thus saving time and eliminating handling-related defects.

LAM is specially designed for main-stream LAM inspection. It offers unparalleled detection ability on LAM with down to 25 (microns) line/space width technology. The LAM incorporates advanced technology innovations to ensure the level of detection that these masks require at this critical production stage. Camtek offers! various ! stand-alone verification systems that enable verification of panels after inspection. The Pegasus line includes systems for automated inspection of finished IC substrates that are subsequently used in packaging of ball grid array (BGA) and Chip Scale Package (CSP) devices. The Pegasus inspects both sides of the substrate, detecting process and mechanical defects, in particular in the gold-plated areas, where the substrate will interconnect with the silicon die or the PCB, and in the solder-mask areas. Pegasus models handle substrates in strip format in magazines.

GreenJet is a SM digital printing system aimed to replace the conventional SM application lines for prototypes and high mix low volume production. The GreenJet system offers manufacturers flexible and digital SM printing technology solution. The LGP system incorporates PCB digital legend printing technologies with specially developed heat curable ink, resulting in output and system performance. Camtek has developed the inks for both LGP and GreenJet, which involves different chemicals mixed together in order to reach the required ink characterization.

The Company competes with Rudolph Technologies Inc., KLA-Tencor Corporation, Topcon Corporation, Toray Industries, Inc., Hitachi Ltd., Nidec Tosok Corporation., FEI Company, SII Nanotechnology Japan, Carl Zeiss, Inc., Orbotech Ltd., Dainippon Screen Manufacturing Company, Lloyd-Doyle Limited, Gigavis Co. Ltd., ATI Electronics Pty Ltd., Shirai Electronics Industrial Co. Ltd., First EIE SA and MicroCraft K.K.

Advisors' Opinion:

• [By Paul Ausick]

  Stocks on the Move: Ariad Pharmaceuticals Inc. (NASDAQ: ARIA) is up 35.7% at $5.13. Camtek Inc. (NASDAQ: CAMT) is up 71.7% at $4.55 after saying that a 3D printer is coming next year from the company. Sungy Mobile Ltd. (NASDAQ: GOMO) is up 28.8% at $17.19 after last Friday�� IPO. InterCloud Systems Inc. (NASDAQ: ICLD) is down 28.2% at $9.20.

• [By Garrett Cook]

  Technology shares gained around 1.13 percent in Tuesday’s trading. Top gainers in the sector included iGATE (NASDAQ: IGTE), up 7.7 percent, and Camtek (NASDAQ: CAMT), up 9.8 percent.

• [By Paul Ausick]

  Stocks on the Move: Ingersoll-Rand is down 22.2% at $55.54 after completing a spin-off of Allegion plc. Canadian National Railway Co. (NYSE: CNI) is down 48.6% at $57.78 following a 2-for-1 stock split. Camtek Ltd. (NASDAQ: CAMT) is up 38.9% at $5.71.

• [By Paul Ausick]

  Shares of tech industry testing and inspection systems maker Camtek Ltd. (NASDAQ: CAMT) closed at $1.89 on November 7th, the day the company announced third-quarter earnings. It closed at $2.65 last Friday and skyrocketed to a high of $6.43 on Tuesday before dropping back to around $4.00 in Wednesday trading.

Top 10 Semiconductor Companies To Watch In Right Now: Broadcom Corporation(BRCM)

Broadcom Corporation designs and develops semiconductors for wired and wireless communications. It provides a portfolio of system-on-a-chip (SoC) and software solutions for the manufacturers of computing and networking equipment, digital entertainment and broadband access products, and mobile devices, which enable the delivery of voice, video, data, and multimedia content to the home, office, and mobile environment. Its broadband communications products include cable modem SoCs; femtocell SoCs; MPEG/AVC/VC-1 encoders and transcoders; xDSL, passive optical network, and cable modem customer premises equipment and central office solutions; powerline networking SoCs; digital cable, direct broadcast satellite, terrestrial, and Internet protocol (IP) set-top box integrated receiver demodulators; high definition television and standard definition TV SoCs; and Blu-ray disc SoCs. The company?s mobile and wireless products comprise Wi-Fi and Bluetooth SoCs, wireless connectivity com bo chips, global positioning system SoCs, multimedia processors, applications processors, power management units, VoIP SoCs, mobile TV SoCs, and near field communications tags. Its infrastructure and networking products include Ethernet copper transceivers, Ethernet controllers and switches, backplane and optical front-end physical layer devices, security processors and adapters, and broadband processors. The company markets and sells its products through direct sales force, distributors, and manufacturers? representatives in the United States, as well as through regional offices, and a network of independent distributors and representatives in Asia, Australia, Europe, and North America. The company was founded in 1991 and is headquartered in Irvine, California.

Advisors' Opinion:

• [By Vinay Singh]

  The only close competitor to Snapdragon 800 is NVIDIA�(NVDA)'s fourth generation Tegra chips, Tegra 4i, which are expected to be launched in the beginning of next year, and Broadcom�� (BRCM) recently launched BCM21892. The Tegra 4i will be half the size of Snapdragon 800 processor and BCM21892 is currently the smallest LTE 4G enabled chip in the industry. The smaller size of the chips makes them cheaper to produce and more energy efficient. However, Qualcomm�� earlier launch of its Snapdragon 800 processor with an LTE ��dvanced feature places it in an advantageous position, as there is no other competing product.

• [By FinanceGuru]

  Now that Broadcom (BRCM) has finally thrown in the towel on its cellular business after years of failing to succeed, the company is trying to shop around the division. The company's management team claims that the product pipeline that was under development had significant technical merit, but that the economics of running that business just couldn't support a $700 million-a-year operating expense run rate. That said, if Broadcom can successfully shop the business, Apple (AAPL) seems the most likely buyer.

• [By Paul Ausick]

  Short interest in Broadcom Corp. (NASDAQ: BRCM) rose 17.3% to 12.33 million shares. That is 2.2% of the total float. Broadcom is scheduled to report results on Thursday, and analysts estimate EPS at $0.57 on revenues of $2.02 billion. Both figures are below last year’s totals.

Top 10 Semiconductor Companies To Watch In Right Now: Tokyo Electron Ltd (TOELY.PK)

Tokyo Electron Limited is a company mainly engaged in the manufacture and sale of electronic products for industrial uses. The Semiconductor Manufacturing Equipment, Flat-panel Display (FPD) and Photovoltaic Cell (PV) Manufacturing Equipment segment provides coaters and developers for wafer processing, plasma etching equipment, thermal processing systems, single wafer deposition systems, cleaning systems, coaters and developers for FPD manufacturing, ashing devices and plasma chemical vapor deposition (CVD) devices. The Electronic Component and Information Communication Equipment segment designs, develops, purchases and sells semiconductor products such as integrated circuits (ICs), computer and network equipment and software. The Others segment involves in logistics, facility management and insurance businesses. On April 1, 2013, it merged with two subsidiaries. In January 2014, the Company established TEL-Applied Holdings B.V. and a Japan-based company. Advisors' Opinion:

• [By Stephen Simpson, CFA]

  Ultratech isn't the only game in town, though, and there are multiple technologies and process steps that are going to play significant roles in the production of FinFETs and 3D circuits. With that, I would take a look at Mattson Technologies (MTSN), as this company has already accomplished the not-so-easy task of gaining meaningful share in the dry strip, rapid thermal processing (RTP), and etch markets despite competing with giants like Lam Research (LRCX), Applied Materials (AMAT), and Tokyo Electron (TOELY.PK).